Rockford Fosgate 12 Dual Coil 1500 Continuous Rms
Car Woofer, Subwoofers And Basstubes
Providing you the best range of Rockford Fosgate P300-10T Punch Series Slim 10 Inch Active Car, Rockford Fosgate T3-BMW-SUB Power Series OE Integration, Kicker CWCD124 12 Inch Passive Car Subwoofer (Dual Voice Coil) Peak Power: 600W RMS: 300W, Kicker C124 12 Inch Passive Car Subwoofer (Single Voice Coil) Peak Power: 300W RMS: 150W, JL Audio 10TW1-4 10 Inch Passive Slim Car Subwoofer RMS: 300W and Kicker L7S152 15 Inch Passive Car Subwoofer (Dual Voice Coil) Peak Power : 2000W RMS: 1000W with effective & timely delivery.+ Read More
Rs 20,076/ Piece
Rs 17,480/ Piece
Rs 8,500/ Piece
Rs 7,100/ Piece
Rs 28,041/ Piece
Rs 31,500/ Piece
Rs 26,754/ Piece
Rs 7,850/ Piece
Rs 38,241/ Piece
Rs 33,991/ Piece
Rs 75,000/ Piece
Rs 25,491/ Piece
Rs 12,487/ Piece
Rs 13,590/ Piece
Rs 32,500/ Piece
Rs 1.1 Lakhs/ Piece
Rs 1.1 Lakhs/ Piece
Rs 11,891/ Piece
Rs 13,450/ Piece
Rs 7,100/ Piece
Rs 7,850/ Piece
Rs 7,250/ Piece
Rs 25,990/ Piece
Rs 27,245/ Piece
Rs 12,478/ Piece
Rs 10,350/ Piece
Rs 11,200/ Piece
Rs 22,895/ Piece
Rs 22,295/ Piece
Rs 18,120/ Piece
Rs 14,441/ Piece
Rs 29,990/ Piece
Rs 10,860/ Piece
Rs 68,760/ Piece
Rs 22,295/ Piece
Rs 21,200/ Piece
Rs 11,395/ Piece
Rs 1.1 Lakhs/ Piece
Rs 6,750/ Piece
Rs 6,695/ pair
Interested in this product?
| Model Name/Number | P300-10T |
| Brand | Rockford |
| Woofer Series | Proprietary |
| Power Handling (Watts RMS) | 300 Watts RMS |
| Tone Controls | Gain & Bass Boost |
| Signal Input | Low-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs |
| Power Input Connector | Quick Disconnect |
| Visual Indicators | Power Protect |
If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-10 is the right one for the job! The P300-10 features a Punch 10" subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
- "Closed-loop" design ensures optimum performance between woofer, amplifier and enclosure
- Built-in 0°/180° phase switch
- Separate low level and speaker level inputs
- Built-in adjustable bass boost EQ
- Adjustable 12db/Octave low pass crossover
- Detachable Power/Ground connector
- Intelligent auto turn on/off function
- Thermal and over/under voltage protection
- High-efficiency, low current design
- Remote bass level control included
- Proprietary high output woofer
- Constructed with 5/8″ MDF
- Large AWG input terminals
- Covered with industrial heat activated vinyl
- 1 Year Warranty
- In-Built Amplifier : Yes
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.
CEA-2006 Compliant
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards.
Klippel Verified
Klippel is a speaker certification program allowing us to deliver the best possible subwoofers.
View Complete Details
Yes, I am interested!
Interested in this product?
| Model Name/Number | T3-BMW-SUB |
| Brand | Rockford |
| Size | 8" |
| Power Handling | 150 Watts RMS / 300 Watts Max |
| shipping Weight | 3.85 Lbs. (1.7 Kg.) |
| Fs | 38 |
| Qes | 0.63 |
| Cutout Diameter | 7.7 in. (195 mm) |
The T3-BMW-SUB is a direct fit subwoofer intended to replace or upgrade factory models installed in select BMW® vehicles (see compatibility chart). The speaker is designed using a neodymium motor and glass fiber sandwich cone and rubber surround. Sub features the BMW® factory connector for easy plug-n-play operation. Made in Germany.
- Glass fiber reinforced poly???carbonate frame
- NBR rubber surround
- Bimax spider
- Neodymium magnet
- 2″ voice coil with high temp aluminum former
- Designed to replace factory OEM BMW 8″ woofer
- Includes original BMW connectors
- 1 Year Warranty
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.
Klippel Verified
Klippel is a speaker certification program allowing us to deliver the best possible subwoofers
Anodized Aluminum Voice Coil Former
Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide superior heat dissipation (up to 100° at full power levels). Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | CWCD124 |
| Rated Impedance | 4 ohms |
| Mounting Depth | 13.6 cm |
| Axial Sensitivity Spl 1 W 1 M | 88.3 |
| Size | 12 Inches |
| Peak Power | 600W |
| RMS | 300W |
| Mounting Diameter | 27.9 cm |
| Warranty | 1 year |
| In-Built Amplifier | No |
12″ CompC 4 Ohm DVC
Perimeter venting keeps the air free-flowing around the motor structure. With a KICKER sub that doesn't overheat, you get high-performance bass that keeps the music pounding.
Features:
- Dual Four-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Perimeter Venting for Thermal Management
- Ribbed Polyurethane Surround
- Signature Yellow Surround Stitching
- High-Strength Spiralead™ Tinsel Leads
- Stamped Steel Basket
- High Temp Voice Coil
- Spring-Loaded Speaker Terminals
*The CompC 12-Inch Subwoofer works best with a sealed or ported enclosure and 300 watts of recommended power. See below for more details.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | C124 |
| Frequency Response | 27-500 Hz |
| RMS | power range 25-150 watts |
| peak power | 300 watts |
| sensitivity | 88.6 dB SPL |
| mount depth | 5-5/8" |
| sealed box volume | 1.25-3.5 cubic feet |
Here's the sub that made Kicker famous! The Comp (short for "competition") delivers out-of-this-world bass at a down-to-earth price. With a cool, updated appearance, the Comp is the perfect introduction to slick-lookin', hard-rockin' Kicker sound. The C124 12″ sub delivers gut-busting bass in a variety of enclosures.
Instead of a traditional dustcap, the Comp features Kicker's Inverted Structural Dome for unmatched structural integrity. The polymineral cone is rigid to resist flexing. The polyester foam surround is double-stitched to the cone for added strength. Perimeter venting keeps the voice coil cool for truer sound.
View Complete Details
Yes, I am interested!
Interested in this product?
| Model Name/Number | 10TW1-4 |
| Brand | JL Audio |
| Continuous Power Handling (RMS) | 300 W |
| In-Built Amp | No |
| Warranty | 1 Year |
| Recommended Amplifier Power (RMS) | 75 - 300 W |
TW1 10-inch Subwoofer (300 W, 4 Ω)
Built on JL Audio's patented thin-line subwoofer technology, the 10TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.35 cu.ft. / 10 liters). This, combined with a special cast alloy frame design, makes the 10TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design.
JL Audio's patented thin-line woofer technology compresses the architecture of the 10TW1 using a "concentric tube" structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.
The 10TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame's dimensions. Thanks to this feature, the 10TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth.
Even though the 10TW1 is optimized for an enclosure much smaller than any other JL Audio ten-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box…instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system.
- Very shallow mounting depth (4.36 in / 111 mm)
- No pole vent: permits mounting close to rear wall of enclosure
- Extremely small sealed enclosure volume requirements
- Long linear excursion capability (0.40 in / 10 mm, one-way)
- DMA-optimized motor design
- Patented "concentric tube" architecture
- Patented "floating cone attach method" technology
- Cast alloy frame with flat edges for tight driver grouping
- Injection molded, mica-filled polypropylene cone
- Rubber surround
- Steel mesh grille included with each driver
- Precision-built in USA at JL Audio's Miramar, Florida factory with global components
Dynamic Motor Analysis – DMA Optimized Motor
Summary:
JL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients… or put simply: tight, clean, articulate bass.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | L7S152 |
| Size/Dimension | 15, 38 |
| Mounting Depth | (IN.,CM) 8-11/16, 22 |
| Axial Sensitivity Spl 1 W 1 M | (dB 1w/1m) 89.4 |
| Frequency Response | (Hz) 18-100 |
| Impedance | 2 DVC Max Rec Amplifier Power |
| Mounting Cutout | Square (IN.,CM) 13-3/4, 34.9 |
Square Matters The heavy-duty motor structure includes a large-diameter spider for less flex, longer life and superior accuracy. High-temp voice coil wire winding completes a powerful Comp motor that makes the most of every watt you give it. Features: Dual Two-Ohm Voice Coils Injection-Molded Polypropylene Cone Patented Corner Ribs Minimize Distortion SoloKon 360-Degree Back Bracing Ribbed Santoprene Surround With Blue Surround Stitching UniPlate Black Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management Thick Tinsel Leads Large Ceramic Magnet Cast Aluminum Basket Satin-Nickel Plated, Spring-Loaded Speaker Terminals *The Solo-Baric L7S 15-Inch Subwoofer works best with a sealed or ported enclosure and 1,000 watts of recommended power. See below for more details. Specifications Size (IN.,CM) 15, 38.1 Impedance (OHMS) 2 DVC Max Rec Amplifier Power (WATTS PEAK/RMS)* 2000/1000 Sensitivity (dB 1w/1m) 89.4 Frequency Response (Hz) 18-100 Mounting Depth (IN.,CM) 8-11/16, 22.1 Mounting Cutout, Square (IN.,CM) 13-3/4, 34.9 Min Rec Sealed Box Volume (CU. FT., Liters) 1.5, 42.5 Max Rec Sealed Box Volume (CU. FT., Liters) 6.0, 169.9 Min Rec Vented Box Volume (CU. Ft., Liters)** 3.0, 85.0 Max Rec Vented Box Volume (CU. Ft., Liters)** 6.0, 169.9.1 Year WarrantyIn-Built Amplifier: NoSolo-Baric L7S Subwoofers
The KICKER Solo-Baric L7S is based on the groundbreaking original square subwoofer. Massive power handling and more cone area means you move more air, and get more bass.
GRACE UNDER PRESSURE
The patented ribbed corners on the Solo-Baric L7 Santoprene surrounds are constantly defeating distortion while adding control to make your bass loud AND clear – even with thousands of watts pumping through them.
SOLO STRENGTH
KICKER's most advanced cone design, the injection-molded SoloKon adds 360-degree, constant-contact back bracing for a woofer that's stronger, more reliable, and incredibly responsive.
TAKE THE HEAT
The cooler a sub is, the longer it'll play. KICKER's UniPlate back plate and pole piece are a single, solid unit, which allows heat to move away from the motor. Venting below the spider allows even more air to move, and heat to escape. Your subs play cool, as your music keeps bumping!
MATERIAL WITNESS
Choosing the right materials makes all the difference. Heavy-duty tinsel. Thick, semi-progressive spider. Dual high-temperature voice coils. Ceramic magnets. A forged aluminum frame. All this technology comes together to get the juice exactly where it needs to go. From your amps, right to your ears!
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | L7S124 |
| Axial Sensitivity Spl 1 W 1 M | 86.90 dB |
| Peak | 1,500 watts |
| RMS | 750 watts |
| Top-mount depth | 6-13/16" |
| Frequency Response: | 20 -500Hz |
| Resonance Frequency | 34Hz |
| In-Built Amp | No |
| Warranty | 1 Year |
- 12″ 4 ohm L7-S Series Subwoofer
- Power Handling:
- Peak: 1,500 watts
- RMS: 750 watts
- Injection-molded polypropylene cone
- Large-diameter spider
- Patented square L7 subwoofer design
- Ribbed Santoprene surround with blue stitching
- Dual 2-ohm voice coils
- Top-mount depth: 6-13/16″
- Frequency Response: 20 -500Hz
- Sensitivity: 86.90 dB
- Resonance Frequency (Fs): 34Hz
- Large ceramic magnet
- Cast aluminum basket
- Spring-loaded, satin-nickel plated speaker terminals
- SoloKon 360-degree back bracing
- Corner ribs decrease distortion
- Authorized Internet Dealer
- In-Built Amp: No
- 1-year Warranty
Features: Kicker L7S124 12″ 1500 Watt Solobaric L7S Car Subwoofer Solo-Baric 44L7S12-4. Dual Four-Ohm Voice Coils. Injection-Molded Polypropylene Cone. Patented Corner Ribs Minimize Distortion. SoloKon 360-Degree Back Bracing. Ribbed Santoprene Surround With Blue Surround Stitching
UniPlate Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management. Thick Tinsel Leads. Large Ceramic Magnet. Cast Aluminum Basket. Satin-Nickel Plated, Spring-Loaded Speaker Terminals
The Solo-Baric L7S 12-Inch Subwoofer works best with a sealed or ported enclosure and 750 watts of recommended power. See below for more details.. Specifications: Size: 12″ (30.5 cm). Impedance: 4 Ohms DVC. Max Rec Amplifier Power: 1500 Watts Peak / 750 Watts RMS. Sensitivity: 88.6 dB 1w/1m
Frequency Response: 20Hz – 100Hz. Mounting Depth: 6-11/16″ (16.9 cm). Mounting Cutout, Square: 11-1/16″ (28.1 cm). Min Rec Sealed Box Volume: 0.88 cu. ft. (24.9 liters). Max Rec Sealed Box Volume: 2.0 cu. ft. (56.6 liters). Min Rec Vented Box Volume: 1.75 cu. ft. (49.6 liters)
Max Rec Vented Box Volume: 3.25 cu. ft. (92.1 liters)
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | CWCS124 |
| Axial Sensitivity Spl 1 W 1 M | 88.3 dB |
| Frequency Response | 27-500 Hz |
| RMS | handles up to 300 watts |
| peak power handling | 600 watts |
| Warranty | 1 Year |
KICKER CWCS124 Perimeter venting keeps the air free-flowing around the motor structure. With a KICKER sub that doesn't overheat, you get high-performance bass that keeps the music pounding. Features: Four-Ohm Voice Coil Injection-Molded Polypropylene Cone Perimeter Venting for Thermal Management Ribbed Polyurethane Surround Signature Yellow Surround Stitching High-Strength Spiralead Tinsel Leads Stamped Steel Basket High Temp Voice Coil Spring-Loaded Speaker Terminals *The CompC 12-Inch Subwoofer works best with a sealed or ported enclosure and 300 watts of recommended power. See below for more details. Specifications Size (IN.,CM) 12, 30 Impedance (OHMS) 4 SVC Max Rec Amplifier Power (WATTS PEAK/RMS)* 600/300 Sensitivity (dB 1w/1m) 88.3 Frequency Response (Hz) 27-500 Mounting Depth (in, cm) 5-3/8, 13.6 Mounting Cutout (in, cm) 11, 27.9 Min Sealed Box Vol (cu. ft, L) 1.25, 35.4 Max Sealed Box Vol (cu. ft, L) 3.5, 99.1 Min Vented Box Vol (cu. ft, L) 1.75, 49.6 Max Vented Box Vol (cu. ft, L) 2.25, 63.7
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | JL Audio |
| Model Name/Number | CP108LG-W3v3 |
| Finish | Black carpet |
| Continuous Power Handling (RMS) | 250 W |
| In-Built Amplifier | No |
| Warranty | 1 Year |
| Enclosure Type | Slot-ported, Low-profile |
| Grille Included | Black Steel Mesh |
Enclosed Subwoofer System with Single 8W3v3-4 Subwoofer, Black Carpet (250 W, 4 Ω) – Ported Enclosure
This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 8W3v3 Subwoofer into an efficient slot-ported design.
Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.
This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.
Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the Subwoofer.
Construction: CNC-Cut High-Grade MDF
Recommended amplifier power: 100 – 250W
Nominal Impedance: 4 Ω
V-Groove MDF Construction
Summary:
This advanced cabinet-building technique uses CNC-machining to create precise panel joints that make enclosure assembly more efficient and exact.
Detailed Information:
We begin with quality medium-density fiberboard, which is then machined on our CNC-controlled KOMO woodworking stations. These powerful machines are able to cut a wide range of features onto a sheet of MDF, with minimal waste and absolute precision. The KOMO machines cut out the woofer holes, terminal holes, cut dado grooves, create countersinks and most importantly, cut the angles at the edges of the panels that form the enclosure's main shell so that these panels fit together precisely, with no gaps or leaks.
Once the panels are cut, assembly technicians line them up in the correct order and glue their outer faces onto a long piece of carpet, creating a "wrap": a long series of panels, hinged temporarily by the carpet. In the next assembly step, our wood assembly teams fill the V-grooves between the panels and any dado grooves that receive dividers or secondary wraps with wood-glue. Once the glue is applied, the enclosure shells folds together along the V-grooves, capturing dividers in the dado grooves and secondary wraps, and evenly spreading the glue throughout the joints. One line of mechanical fasteners is applied to hold the structure together while the wood glue dries.
The V-groove technique greatly improves assembly efficiency, and also results in a far stronger and better sealed enclosure than the typical butt-joint construction found on imported enclosures. The quality of the MDF used in JL Audio systems is also vastly better than the typical "China-Grade MDF" used in the imported products.
Flared Slot-Port
Summary:
The flared slot-port design reduces turbulence at the port mouth so as to minimize any audible airflow effects common to ported enclosures.
Detailed Information:
While ported enclosures deliver important efficiency advantages over their sealed counterparts, they also present unique design challenges. In car audio, the desire for lower tuning frequencies from small enclosure volumes leads to long port lengths that often require compromising the port area. These compromises lead to higher airflow speeds through the port, which can create noise as the air is driven across the edge of the port. The flared port design minimizes these airflow effects by providing a smooth transition for the high-speed air flow, rather than an abrupt termination. The result is less noise and cleaner-sounding bass.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | JL Audio |
| Model Name/Number | CP 112 W0V3 |
| Finish | Gray carpet |
| Continuous Power Handling (RMS) | 300 W |
| Warranty | 1 Year |
| In-Built Amp | No |
| Enclosure Type | Slot-ported |
| Grille Included | No |
Enclosed Subwoofer System with Single 12W0v3-4 Subwoofer, Dark Gray Carpet (300 W, 4 Ω) – Ported Enclosure
This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value.
The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.
The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.
This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal.
Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth.
Construction: MDF
Recommended amplifier power: 75 – 300W
Nominal Impedance: 4 Ω
Dynamic Motor Analysis – DMA Optimized Motor
Summary:
JL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients… or put simply: tight, clean, articulate bass.
Detailed Information:
Since 1997, JL Audio has been at the forefront of Finite Element Analysis-based modeling of loudspeaker motors and suspensions. This research is aimed at decoding what we refer to as the "Loudspeaker Genome"… a project aimed at understanding the true behavior of loudspeakers under power and in motion. A major component of this integrated system is DMA (Dynamic Motor Analysis). Starting with the 15W3 and the W7 Subwoofers in the late 1990's and early 2000's, DMA has played an important role in the design of all JL Audio woofers sold today, including our component woofers.
DMA is a Finite Element Analysis (FEA)-based system, meaning that it takes a large, complex problem, breaks it down into small solution elements for analysis and then assembles the data to form an accurate, "big-picture" solution. DMA's breakthrough is that it actually considers the effects of power through the coil as well as coil/cone position within the framework of a time-domain analysis. This gives us a highly accurate model of a speaker's actual behavior under real power, something that the traditional Thiele-Small models or other low power measurements cannot do. Because DMA does not rely on a steady-state model, it is able to consider shifts in the circuit elements being analyzed. These modeling routines are intense, requiring hours to run for a whole speaker.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | DL7S122 |
| Box Top Depth (in, cm): | 16-1/4, 41.3 |
| Box Bottom Depth (in, cm): | 19-1/2, 19.4 |
| Box Height (in, cm): | 16, 40.6 |
| Box Width (in, cm): | 33-3/4, 85.7 |
| What's in the box | one loaded enclosure with two 12-inch subwoofers; mounting hardware (4 - black brackets, 4 - #10 bla |
The enclosure features the custom-designed vent/terminal cup with an extra thick front baffle and fortified back bracing for one of the sturdiest enclosures in the industry. Two Solo-Baric L7S 12-Inch Subwoofers pound out massive bass with a single 2Ω connection.
Features:
- Genuine Solo-Baric® L7S™ Subwoofer Included
- Custom Engineered Port Design
- Heavy Internal Bracing
- Single 2-Ohm Terminal
- Easy To Install And Wire
- Thick Black Carpeting
- Rounded Corners
- Embroidered KICKER Logo
- Thick MDF Construction
- 1 Year Warranty
- In-Built Amplifier: No
The Dual Solo-Baric L7S 12-Inch Subwoofer Enclosure works best with 1500 watts of recommended power. See below for more details.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | JL Audio |
| Model Name/Number | 15W0-4 |
| Nominal Diameter | 15.0 in / 380 mm |
| Continuous Power Handling (RMS) | 500 W |
| Warranty | 1 Year |
| In-Built Amp | No |
| Recommended Amplifier Power (RMS) | 150 - 500 W |
| Free Air Resonance (Fs) | 24.43 Hz |
W0v3 15-inch Subwoofer (500 W, 4 Ω)
Sometimes, bigger is better… For these situations, the 15W0v3 offers excellent excursion capability, linearity and an overall performance envelope that puts it right at the top of its price class. It features a very beefy 2.5 in. diameter voice coil and our patented Elevated Frame Cooling design for enhanced power handling and reliability.
The 15W0v3 is best used with amplifier power in the 150W – 500W range and is optimized to operate in a moderately sized 1.875 cu. ft. (53.1 l) sealed enclosure, or a 2.75 cu. ft. (77.88 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.
Dynamic Motor Analysis – DMA Optimized Motor
Summary:
JL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients… or put simply: tight, clean, articulate bass.
Detailed Information:
Since 1997, JL Audio has been at the forefront of Finite Element Analysis-based modeling of loudspeaker motors and suspensions. This research is aimed at decoding what we refer to as the "Loudspeaker Genome"… a project aimed at understanding the true behavior of loudspeakers under power and in motion. A major component of this integrated system is DMA (Dynamic Motor Analysis). Starting with the 15W3 and the W7 Subwoofers in the late 1990's and early 2000's, DMA has played an important role in the design of all JL Audio woofers sold today, including our component woofers.
DMA is a Finite Element Analysis (FEA)-based system, meaning that it takes a large, complex problem, breaks it down into small solution elements for analysis and then assembles the data to form an accurate, "big-picture" solution. DMA's breakthrough is that it actually considers the effects of power through the coil as well as coil/cone position within the framework of a time-domain analysis. This gives us a highly accurate model of a speaker's actual behavior under real power, something that the traditional Thiele-Small models or other low power measurements cannot do. Because DMA does not rely on a steady-state model, it is able to consider shifts in the circuit elements being analyzed. These modeling routines are intense, requiring hours to run for a whole speaker.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | CWCS154 |
| Axial Sensitivity Spl 1 W 1 M | 90.3 dB |
| Frequency Response | 25-500 Hz |
| njection | molded polypropylene cone |
| power handling | 600 watts RMS |
| peak power handling: | 1200 watts |
| top-mount depth | 7" |
| Sealed Box Volume (Vb) | 2.25 - 5.00 cu. ft. |
| ported box volume | 3.00 - 4.00 cu. ft. |
| warranty | 1 year |
| In-Built Amplifie | No |
When it comes to bass, Kicker has a long and proven pedigree of putting out great subs. The Kicker CompC subs have their roots in the original Kicker Comp line that goes back to 1986, giving you the benefit of Kicker's years of experience in the art of bass.
Kicker technology at work
Kicker's 44CWCS154 15″ subwoofer features a flex-resistant polypropylene cone for hard-hitting lows without distortion, while the ribbed foam surround promotes long excursion and helps to keep the cone on target. The sub's steel basket provides a reliable foundation for big bass, and its extensive venting ensures long-lasting performance that won't break down when the bass gets heavy.
Versatile installation
This sub handles up to 600 watts RMS to bring out the punch your music's been missing, and its 4-ohm impedance makes it compatible with just about every amplifier on the market. This versatile sub works well in sealed or ported enclosures.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | JL Audio |
| Model Name/Number | 12W03-4 |
| Nominal Diameter | 12.0 in / 300 mm |
| Continuous Power Handling (RMS) | 300 W |
| Warranty | 1 Year |
| In-Built Amp | No |
| Recommended Amplifier Power (RMS) | 75 - 300 W |
| Free Air Resonance (Fs) | 28.43 Hz |
W0v3 15-inch Subwoofer (500 W, 4 Ω)
Sometimes, bigger is better… For these situations, the 15W0v3 offers excellent excursion capability, linearity and an overall performance envelope that puts it right at the top of its price class. It features a very beefy 2.5 in. diameter voice coil and our patented Elevated Frame Cooling design for enhanced power handling and reliability.
The 15W0v3 is best used with amplifier power in the 150W – 500W range and is optimized to operate in a moderately sized 1.875 cu. ft. (53.1 l) sealed enclosure, or a 2.75 cu. ft. (77.88 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.
Dynamic Motor Analysis – DMA Optimized Motor
Summary:
JL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients… or put simply: tight, clean, articulate bass.
Detailed Information:
Since 1997, JL Audio has been at the forefront of Finite Element Analysis-based modeling of loudspeaker motors and suspensions. This research is aimed at decoding what we refer to as the "Loudspeaker Genome"… a project aimed at understanding the true behavior of loudspeakers under power and in motion. A major component of this integrated system is DMA (Dynamic Motor Analysis). Starting with the 15W3 and the W7 Subwoofers in the late 1990's and early 2000's, DMA has played an important role in the design of all JL Audio woofers sold today, including our component woofers.
DMA is a Finite Element Analysis (FEA)-based system, meaning that it takes a large, complex problem, breaks it down into small solution elements for analysis and then assembles the data to form an accurate, "big-picture" solution. DMA's breakthrough is that it actually considers the effects of power through the coil as well as coil/cone position within the framework of a time-domain analysis. This gives us a highly accurate model of a speaker's actual behavior under real power, something that the traditional Thiele-Small models or other low power measurements cannot do. Because DMA does not rely on a steady-state model, it is able to consider shifts in the circuit elements being analyzed. These modeling routines are intense, requiring hours to run for a whole speaker.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | VL7S122 |
| Axial Sensitivity Spl 1 W 1 M | 86.9 dB |
| Frequency Response | 20-500 Hz |
| Peak: | 1500W |
| RMS | 750W |
| Final Impedance | 2ohms |
| In-Built Amplifier | No |
| Enclosure Dimensions | 14-3/4" TD x 17-7/8" BD x 18-3/4" W x 16" H |
Authorized dealer
General Features:
- 1500W Max Single12″ Vented Subwoofer Enclosure
- Power Handling:
- Peak: 1500W
- RMS: 750W
- Final Impedance: 2ohms
- Preloaded with a single12″ L7S Subwoofer
- Thick black carpet with blue Kicker logo embroidered on the top
- Enclosure Dimensions: 14-3/4″ TD x 17-7/8″ BD x 18-3/4″ W x 16″ H
- Authorized Internet Dealer
- 1-year Warranty
- In-Built Amplifier: No
Subwoofer Features:
- Injection-molded polypropylene cone
- Ribbed Santoprene surround
- Frequency Response: 20-500 Hz
- Sensitivity: 86.9 dB
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | JL Audio |
| Model Name/Number | HO112-W6v3 |
| Finish | Dark gray carpet with black insert |
| Continuous Power Handling (RMS) | 600 W |
| Warranty | 1 Year |
| In-Built Amplifier | No |
| Enclosure Type | Chamber-coupled, slot-ported, rear-firing design |
| Grille Included | No |
Enclosed Subwoofer System with Single 12W6v3-D4 Subwoofer, Dark Gray / Black Carpet (600 W, 2 Ω) – Ported Enclosure
JL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. In the HO112-W6v3, the high power handling of the 12W6v3 Subwoofer, combined with its small enclosure requirements, results in a very compact subwoofer system that is capable of impressive output with moderate amplification.
JL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates just above the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W6v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 12W6v3, and has been fine-tuned through extensive real-world listening.
This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. While no grille is provided, the recessed mounting baffle provides some protection for the woofer. A steel mesh woofer grille insert can be purchased separately (Model: SGR-12W6v2/v3), if additional woofer protection is desired.
Finish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. "JL AUDIO" is embroidered in silver on the side surface of the enclosure.
Construction: CNC-Cut High-Grade MDF
Recommended amplifier power: 200 – 600W
Nominal Impedance: 2 Ω
HO112-W6v3
Available in stores only
High-Output (H.O.) Enclosure Design (U.S. Patent #6,625,292)
Summary:
Insanely powerful H.O. (High Output) systems deliver very high SPL while retaining excellent sound quality.
Detailed Information:
HO models use our patented, chamber-coupled port design. The slot-port wraps around the inner enclosure and terminates on the mounting plane of the woofer. This provides the necessary surface area and port length to maximize the performance of the driver, while also coupling the port output and direct woofer output to radiate together into the listening space.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | JL Audio |
| Model Name/Number | HO112-W6v3 |
| Finish | Dark gray carpet with black insert |
| Continuous Power Handling (RMS) | 600 W |
| Warranty | 1 Year |
| In-Built Amplifier | No |
| Enclosure Type | Chamber-coupled, slot-ported, rear-firing design |
| Grille Included | No |
Enclosed Subwoofer System with Single 12W6v3-D4 Subwoofer, Dark Gray / Black Carpet (600 W, 2 Ω) – Ported Enclosure
JL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. In the HO112-W6v3, the high power handling of the 12W6v3 Subwoofer, combined with its small enclosure requirements, results in a very compact subwoofer system that is capable of impressive output with moderate amplification.
JL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates just above the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W6v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 12W6v3, and has been fine-tuned through extensive real-world listening.
This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. While no grille is provided, the recessed mounting baffle provides some protection for the woofer. A steel mesh woofer grille insert can be purchased separately (Model: SGR-12W6v2/v3), if additional woofer protection is desired.
Finish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. "JL AUDIO" is embroidered in silver on the side surface of the enclosure.
Construction: CNC-Cut High-Grade MDF
Recommended amplifier power: 200 – 600W
Nominal Impedance: 2 Ω
HO112-W6v3
Available in stores only
High-Output (H.O.) Enclosure Design (U.S. Patent #6,625,292)
Summary:
Insanely powerful H.O. (High Output) systems deliver very high SPL while retaining excellent sound quality.
Detailed Information:
HO models use our patented, chamber-coupled port design. The slot-port wraps around the inner enclosure and terminates on the mounting plane of the woofer. This provides the necessary surface area and port length to maximize the performance of the driver, while also coupling the port output and direct woofer output to radiate together into the listening space.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | JL Audio |
| Model Name/Number | 10W03-4 |
| Nominal Diameter | 10.0 in / 250 mm |
| Continuous Power Handling (RMS) | 300 W |
| Warranty | 1 Year |
| In-Built Amp | No |
| Recommended Amplifier Power (RMS) | 75 - 300 W |
| Overall Diameter (A) | 10.52 in / 267 mm |
W0v3 10-inch Subwoofer (300 W, 4 Ω)
The 10W0v3 is a rugged performer with excellent excursion capability and linearity and an overall performance envelope that puts it right at the top of its price class. It features a beefy 2 in. diameter voice coil and our patented Elevated Frame Cooling design for enhanced power handling and reliability.
The 10W0v3 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.65 cu. ft. (18.4 l) sealed enclosure, or a 1.125 cu. ft. (31.9 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | CWCD154 |
| Warranty | 1 Year |
| In-Built Amplifier | No |
| Features 1 | 1200 watts peak power handling for hard hitting bass |
| Features 2 | Injection-molded polypropylene cone adds endurance and smooth bass |
| Feature 3 | Perimeter venting for thermal management under high power demands |
| Feature 4 | Stamped steel basket for durability |
| Feature 5 | High temp voice coil |
15″ CompC 4 Ohm DVC
CompC Subwoofers are equipped with a stamped steel frame and world-class durability for hard-hitting, high-performance bass.
Features:
- Dual Four-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Perimeter Venting for Thermal Management
- Ribbed Polyurethane Surround
- Signature Yellow Surround Stitching
- High-Strength Spiralead™ Tinsel Leads
- Stamped Steel Basket
- High Temp Voice Coil
- Spring-Loaded Speaker Terminals
*The CompC 15-Inch Subwoofer works best with a sealed or ported enclosure and 600 watts of recommended power. See below for more details.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | CWCD104 |
| Warrant | 1 year |
| in-Built Amp | No |
| Dual Four | Ohm Voice Coil |
| Injection | -Molded Polypropylene Cone |
| Feature 1 | Perimeter Venting for Thermal Management. Ribbed Polyurethane Surround |
| Feature 2 | Signature Yellow Surround Stitching. High-Strength Spiralead Tinsel Leads |
| Feature 3 | Stamped Steel Basket. High Temp Voice Coil. Spring-Loaded Speaker Terminals |
| Feature 4 | The CompC 10-Inch Subwoofer works best with a sealed or ported enclosure and 300 watts of recommende |
| Feature 5 | Perimeter Venting for Thermal Management |
Kicker CWCD104 CompC 10″ Subwoofer Dual Voice Coil 4-OhmThe CompC 500 watt 10″ DVC Subwoofer is equipped with stamped steel frame construction inheriting elite innovations for world-class KICKER power durability and hard-hitting high-performance bass. ;
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | CWS122 |
| Sensitivity | 88.3 dB |
| top-mount depth | 5-3/8" |
| sealed box volume | 1.25 - 3.50 cu. ft. |
| ported box volume | 1.75 - 2.25 cu. ft. |
| warranty | 1 year |
| In-Built Amp | No27-500 Hz |
If you're looking to add some boom to your car's sound system, Kicker's CompS line will get your car shaking without draining your wallet. These subs are the latest in the legendary Kicker Comp line that started in 1986, with a proven pedigree when it comes to delivering powerful bass.
The heavy steel basket cuts down on unwanted vibrations.
Kicker's 40CWS122 12″ subwoofer features a flex-resistant polypropylene cone for hard-hitting lows without distortion, while the ribbed foam surround promotes long excursion and helps to keep the cone on target. The sub's steel basket provides a reliable foundation for big bass, and its extensive venting ensures long-lasting performance that won't break down when the bass gets heavy.
This sub handles 300 watts RMS to bring out the depth your music's been missing, and its 2-ohm impedance brings out max power from your mono amp. This versatile sub works well in sealed or ported enclosures, and it's even suitable for free-air applications.
View Complete Details
Yes, I am interested!
Interested in this product?
| Model Name/Number | R2SD4-12 |
| Brand | Rockford |
| Power Handling (Watts RMS) | 250 Watts RMS 500 Watts Max |
| Xmax (mm) | 10 |
| Sealed Box Volume (Vb) | 0.9 cu. ft. (25.4 Liters) |
| shipping Weight | 12.013 Lbs. (5.44 kg.) |
| Voice Coil Type | Dual Voice Coil |
| Subwoofer Type | Shallow |
| Speaker Connector | Dual 12 AWG compression |
When you have no space for bass, our R2 12″ shallow subwoofer can help satisfy your need for low frequency music. These drivers can fit in tight spaces due to an elevated motor structure that reduces speaker depth. Mica injected polypropylene cones make sure bass notes are clean and accurate. Stamp-cast baskets feature spider venting typically reserved for traditional depth mounted models to keep the motor cool! These shallow subwoofers are optimized for sealed enclosures.
- 12 AWG compression terminals
- Anodized aluminum voice coil former
- Optimized for sealed enclosures
- Mica injected polypropylene cone
- Linear spider with embedded 16 AWG tinsel leads
- StampCast basket with integrated spider venting
- Integrated PVC trim ring
- Shallow Motor Assembly
- 1 Year Warranty
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | L7R122 |
| Size/Dimension | 30 cm |
| Axial Sensitivity Spl 1 W 1 M | 86.7 db |
| Thiele / Small Parameters | 45L7R122 T/S Parameters |
| In-Built Amplifier | No |
| Impedance Ohms | 2 DVC |
| RMS | 600W |
| Peak Power | 1200W |
| Mounting Depth (G) | 17.4 |
| Mounting Diamater | 28.1 cm |
Product Description
BIG BASS. SAME SPACE.
The engineers at KICKER HQ designed the L7R to give you more bass than a circular sub, without a larger enclosure. Welcome to the world of square sub perfection!
- Dual two-Ohm Voice Coil
- Wrap Around Gasketing
- Patented Ribbed Corners
- Injection-Molded SoloKon™ Woofer
- 360-Degree Back Bracing
- UniPlate™ Back Plate And Pole Piece
- Bumped Back Plate
- Thick Tinsel Leads
- Large Ceramic Magnet
- Steel Basket With Spoke Design
- Nickel Plated Speaker Terminals
The L7R 12-Inch Subwoofer works best with 600 watts of recommended power in a sealed or ported enclosure. See below for more details.
Whats in the box ?
1 – 12″ Subwoofer, 1 – install manual, 2 – Kicker stickers
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | kicker |
| Model Name/Number | L7S122 |
| Axial Sensitivity Spl 1 W 1 M | 86.9 dB |
| Type | Single |
| Impedance Ohms | 2 |
| RMS | 750W |
| Peak Power | 1500W |
| Box Top Depth | 37.4 |
| Warranty | 1 Year |
Product Description
Single 12″ Solo-Baric L7S 2 Ohm Enclosure
Made from thick, solid wood and brandishing a custom terminal/port combination, this loaded sub box is all bass – and all KICKER!
Features:
- Genuine Solo-Baric® L7S™ Subwoofer Included
- Custom Engineered Port Design
- Heavy Internal Bracing
- Single 2-Ohm Terminal
- Easy To Install And Wire
- Thick Black Carpeting
- Rounded Corners
- Embroidered KICKER Logo
- Thick MDF Construction
*The Solo-Baric L7S 12-Inch Subwoofer Enclosure works best with 750 watts of recommended power. See below for more details.
Whats in the box ?
one loaded enclosure with one 12-inch subwoofer
mounting hardware (4 – black brackets, 4 – #10 black wood screws x 20mm, 8 – #8 black wood screws 20mm long)
one owner's manual
two stickers
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | CWRT122 |
| Size/Dimension | 12 Inches |
| Mounting Depth | 9.6 cm |
| Axial Sensitivity Spl 1 W 1 M | 85.5 |
| Impedance | 2 DVC |
| Peak Power | 600W |
| RMS | 300W |
| Mounting Diameter | 27.9 cm |
| Warranty | 1 year |
| In-Built Amplifier | No |
12″ CompRT 2 Ohm
The CompRT 12-inch Subwoofer is an all-weather thin subwoofer with a pair of 2-Ohm voice coils. With a mounting depth under four inches and plenty of power handling, this go-anywhere sub is as flexible as it is powerful. A UV-resistant cone and surround help make the CompRT sound great wherever the road (or trail) takes you.
A thick magnet structure reliably delivers huge power handling without affecting mounting depth. The specially designed UniPlate™ back plate and solid pole piece serve as a single heat-absorbing unit to provide excellent thermal management. With our custom SoloKon™ technology and the CompRT's unique framework, the sub sounds fat – but keeps it thin! To make our subs even more reliable, KICKER engineers developed Forced-Air Cooling™ to help our subs run 20 percent cooler than before.
The CompRT 12-inch Subwoofer works best with a sealed enclosure and 500 watts of recommended power. See below for more details.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Rated Impedance | 2 ohms |
| Frequency Response | 30-500 Hz |
| Model number | TCWS102 |
| Peak Power | 600 watts |
| RMS | 300 watts |
| Injection | Molded Polypropylene Cone |
| Large | diameter spider |
| Resonance Frequency | 33 Hz |
| Top-mount depth | 4-13/16" |
KICKER is an American consumer electronics manufacturer that exists under Stillwater Designs. They produce home/portable, marine and mobile audio products, and are best known for their subwoofers, as well as their audio crossovers and the amplifiers that supplement them. Kicker is known for its high production of square loudspeakers. Kicker Audio products are designed and manufactured by Stillwater Designs Inc, which is headquartered in Stillwater, Oklahoma. Kicker, along with MTX Audio and JL Audio, is known as one of the pioneers of the car audio industry.
Kicker's 40TCWS102 loaded enclosure puts a thumping 10″ subwoofer behind the seat of a truck or in any vehicle that's low on space. The rugged ported box was designed specifically for the subwoofer, so you can count on getting maximum performance, no matter what kind of tunes you enjoy.
The specially designed port gives you more bass without sounding sloppy.
The 10″ CompS sub features a flex-resistant polypropylene cone for hard-hitting lows without distortion, while the ribbed foam surround promotes long excursion and helps to keep the cone on target. The sub's steel basket provides a reliable foundation for big bass, and extensive venting ensures long-lasting performance that won't break down when the bass gets heavy.
Sturdy medium-density fiberboard ensures long-lasting performance from the enclosure, and the special-design side port delivers more bass without getting sloppy. The enclosure's 2-ohm impedance draws maximum power from your mono amplifier.
- Ported enclosure loaded with one 10″ Subwoofer
- 4 Mounting brackets
- Four 1″ Self-tapping pan head screws
- Eight 5/8″ Self-tapping flat head screws
- Specification and mounting information
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | kicker |
| Model Name/Number | VCWS124 |
| Axial Sensitivity Spl 1 W 1 M | 95 dB |
| Frequency Response | 27-500 Hz |
| power handling | 50-300 watts RMS (600 watts peak power) |
| Warranty | 1 year |
| In-Built Amplifier | No |
| Feature 1 | Ported enclosure loaded with one 12" Subwoofer |
| Feature 2 | 4 Mounting brackets |
| Feature 3 | Four 1" Self-tapping pan head screws |
| Feature 4 | Eight 5/8" Self-tapping flat head screws |
| Feature 5 | Specification and mounting information |
Kicker's 40VCWS124 loaded enclosure puts a thumping 12″ CompS sub behind your music. The rugged ported box was designed specifically for the sub, so you can count on getting maximum performance, no matter what kind of tunes you enjoy.
The specially designed port gives you more bass without sounding sloppy.
The 12″ CompS sub features a flex-resistant polypropylene cone for hard-hitting lows without distortion, while the ribbed foam surround promotes long excursion and helps to keep the cone on target. The sub's steel basket provides a reliable foundation for big bass, and extensive venting ensures long-lasting performance that won't break down when the bass gets heavy.
Sturdy medium-density fiberboard ensures long-lasting performance from the enclosure, and the special-design side port delivers more bass without getting sloppy. The enclosure's 4-ohm impedance allows compatibility with a wide range of amplifiers.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | DCWS122 |
| Rated Impedance | 2-ohm total |
| Axial Sensitivity Spl 1 W 1 M | 100 dB |
| frequency response: | 27-500 Hz |
| In-Built Amplifier | No |
| Power handling | 100-600 watts RMS (1200 watts peak power) |
| Frequency Response (Hz) | 27-500 Hz |
| Warranty | 1 year |
| Feature 1 | Medium-density fiberboard construction covered with carpet |
| Feature 2 | Can't find your Car Audio Systems |
| Feature 3 | Suitable For All Car Make Models |
| Feature 4 | Ported enclosure loaded with two 12" Subwoofers |
| Feature 5 | 4 Mounting brackets |
Kicker's 40DCWS122 loaded enclosure puts a pair of thumping 12″ CompS subs behind your music. The rugged ported box was designed specifically for the subs, so you can count on getting maximum performance, no matter what kind of tunes you enjoy.
The specially designed port gives you more bass without sounding sloppy.
Each 12″ CompS sub features a flex-resistant polypropylene cone for hard-hitting lows without distortion, with a ribbed foam surround that promotes long excursion and helps to keep the cones on target. A heavy-duty steel basket provides a reliable foundation for big bass, and extensive venting ensures long-lasting performance that won't break down when the bass gets heavy.
Sturdy medium-density fiberboard ensures long-lasting performance from the enclosure, and the special-design side port delivers more bass without getting sloppy. The enclosure's 2-ohm impedance draws maximum power from your mono amplifier.
View Complete Details
Yes, I am interested!
Interested in this product?
| Model Name/Number | HS-8 |
| Brand | Kicker |
| Subwoofer Size | 20 cm |
| Frequency Response (Hz) | 25-120 |
| Crossover | 12dB/octave low pass at 50-120Hz; 24dB/octave high pass at 25Hz |
| Phase Switch | 0 Degree/180 Degree |
| Input Sensitivity | Low level - 125mV-5V High level - 250mV-10V |
| Kick EQBoost | variable to +6dB @ 40Hz |
| Remote Bass | Included |
| Box Depth | 35.2 cm |
| Box Height | 94 cm |
The quick-connect Molex® plug and harness entails power, signal and remote turn-on. The Hideaway comes with a remote bass control for fine-tuning bass levels, adjustable low-pass crossover, variable +6dB bass boost, phase-cancelling switch for max output and two automatic turn-on options. It also features high- and low-level inputs for integration with nearly any factory or aftermarket head unit.
Mr. Irby's Recipe – FOR BASS!
KICKER Senior Vice President Charlie Schultz said, "Our president Steve Irby was intimately involved in the design process with the KICKER Research and Development team, and they nailed it with the Hideaway Powered Subwoofer."
"The output is amazing," said Irby during listening tests.
Plug-and-Play Bass
The KICKER Hideaway Compact Powered Subwoofer delivers surprising low frequency output from a remarkably small enclosure, setting a new standard in plug-and-play bass performance and convenience in a vehicle. At just over three inches high and nearly 14 inches long, the Hideaway combines a 150-watt amplifier and an 8-inch subwoofer to add thumping bass to any vehicle from the tightest locations. It also provides a quick-connect power plug and Velcro®-fastened nylon straps for secure installation and simple but fast removal.
Compact Performer
KICKER's legendary subwoofer technology continues to lead the way for clear-sounding, ground-pounding bass in a vehicle. It's incorporated into KICKER's latest bass machine, the brand's first compact powered subwoofer and an International Consumer Electronics Show (CES) Innovations award winner for design and engineering.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | kicker |
| Model Name/Number | PT 8 |
| Frequency Response | 25-120 Hz |
| Sensitivity | 95 dB |
| Warranty | 1-year |
| In-Built Amplifier | No |
| RMS power output | 100 watts |
| KickEQ bass boost: | Variable 0-6dB @ 40Hz |
| Feature 1 | Auto turn on (12v or DC) |
| Low level | 125mV-5V |
| High level: | 250mV-10V |
| Frequency response: | 25-120 Hz |
| Feature 2 | 8" Amplified Enclosure |
| Feature 3 | Sealed design |
| Feature 4 | 3/4" MDF |
All In One BassStationWant to add some bass to your car's audio system, but don't want to go through the hassle of messy installations? Kicker's 2011 BassStation Powered Subs are the perfect solution for those looking to add some bass with simple installation. This new amplified loaded enclosure series comes in four different models, a 12″, 10″, 8″ and a dual subwoofer 12″ model. Equipped with a quick connect Molex power harness, this loaded enclosure will make for easy set up and removal, making it easy to transfer from one location to the next. Nylon Velcro straps will ensure security while your vehicle is in motion. With an included remote bass control, the new BassStation series adds versatility and Kicker quality to any vehicle's car audio system.
View Complete Details
Yes, I am interested!
Interested in this product?
| Model Name/Number | 10W03-4 Enclosure |
| Nominal Diameter | 10.0 in / 250 mm |
| Continuous Power Handling (RMS) | 300 W |
| Warranty | 1 Year |
| Recommended Amplifier Power (RMS) | 75 - 300 W |
| Free Air Resonance (Fs) | 32.09 Hz |
W0v3 10-inch Subwoofer (300 W, 4 Ω)
The 10W0v3 is a rugged performer with excellent excursion capability and linearity and an overall performance envelope that puts it right at the top of its price class. It features a beefy 2 in. diameter voice coil and our patented Elevated Frame Cooling design for enhanced power handling and reliability.
The 10W0v3 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.65 cu. ft. (18.4 l) sealed enclosure, or a 1.125 cu. ft. (31.9 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.
Dynamic Motor Analysis – DMA Optimized Motor
Summary:
JL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients… or put simply: tight, clean, articulate bass.
Detailed Information:
Since 1997, JL Audio has been at the forefront of Finite Element Analysis-based modeling of loudspeaker motors and suspensions. This research is aimed at decoding what we refer to as the "Loudspeaker Genome"… a project aimed at understanding the true behavior of loudspeakers under power and in motion. A major component of this integrated system is DMA (Dynamic Motor Analysis). Starting with the 15W3 and the W7 Subwoofers in the late 1990's and early 2000's, DMA has played an important role in the design of all JL Audio woofers sold today, including our component woofers.
DMA is a Finite Element Analysis (FEA)-based system, meaning that it takes a large, complex problem, breaks it down into small solution elements for analysis and then assembles the data to form an accurate, "big-picture" solution. DMA's breakthrough is that it actually considers the effects of power through the coil as well as coil/cone position within the framework of a time-domain analysis. This gives us a highly accurate model of a speaker's actual behavior under real power, something that the traditional Thiele-Small models or other low power measurements cannot do. Because DMA does not rely on a steady-state model, it is able to consider shifts in the circuit elements being analyzed. These modeling routines are intense, requiring hours to run for a whole speaker.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | L7R152 |
| Maximum Vented Box Volume: | 6.0 cubic feet |
| Minimum Vented Box Volume: | 3.0 cubic feet |
| Maximum Sealed Box Volume: | 3.0 cubic feet |
| Minimum Sealed Box Volume | 1.5 cubic feet |
| Mounting Diameter | 13.75" inches |
| Mounting Depth (G) | 8.38" inches |
| Impedance: | 2-Ohms |
| Sensitivity: | 88.05 dB |
The 15-inch L7R Square Subwoofer moves more air and delivers bigger bass, so you get more bump out of every watt! The engineers at KICKER HQ designed the L7R to give you more bass than a circular sub, without a larger enclosure. Welcome to the world of square sub perfection!
1 YEAR WARRANTY
IN-BUILT AMPLIFIER: NO
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | CWRT102 |
| Mounting Depth | 8.8 cm |
| Thiele/Small Parameters | Coming Soon |
| Peak Power | 800 |
| Woofer Size | 10 Inch |
| In-Built Amp | No |
| RMS | 400 |
10″ CompRT 2 Ohm
The CompRT 10-inch Subwoofer is an all-weather thin subwoofer with a pair of 2-Ohm voice coils. With a mounting depth under four inches and plenty of power handling, this go-anywhere sub is as flexible as it is powerful. A UV-resistant cone and surround help make the CompRT sound great wherever the road (or trail) takes you.
It takes serious know-how for a thin subwoofer to deliver super-deep bass. Our signature red double stitching makes an outstanding bond between the improved Santoprene surround and polypropylene woofer cone. With our custom SoloKon™ technology and the CompRT's unique framework, the sub sounds fat – but keeps it thin! To make our subs even more reliable, KICKER engineers developed Forced-Air Cooling™ to help our subs run 20 percent cooler than before.
The CompRT 10-inch Subwoofer works best with a sealed enclosure and 400 watts of recommended power. See below for more details.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | DS12L7 |
| Impedance | 2 Ohm Final |
| panel | Carbon-fiber front |
| box | Solid wood |
| Dimensions | 16-3/8"TD x 19-9/16"BD x 32-3/8"W x 16"Hc |
| In-Built Amplifie | No |
| Feature 1 | All Manufacturer Warranties are handled through HiFiSoundConnection (1-877-275-4434) |
| Feature 2 | Oversized port |
This Item is used. Item is completely functional but has some writing from Kicker factory on face of subwoofer.
Throw the brand-new DS12L7 into the Solo-Baric L7 Sub Box lineup the first dual-woofer box to transport the extreme Solo-Baric L7 Subwoofer and you've got a bass bonanza of enclosure choices for whatever the need. One dual-sub box, two single ones, one slim-profile box made especially for pickup trucks, and all vented provide the biggest KICKER bass available.
An extra-tough, carbon-fiber look lines the front of the newest KICKER solid-wood boxes, which also sport an embroidered KICKER logo for an intense-looking enclosure.
Ten- and 12-inch, new-for-2008 Solo-Baric L7 Subwoofers, redesigned with additional heat dissipation and full-coverage back bracing, are fortified even further within the box. It makes for some of the toughest sub boxes money can buy.
All four models of Solo-Baric L7 Sub Boxes feature the custom-designed, combo vent/terminal cup, where the impedance designator (2- or 4-Ohm) and oversized port share the same space.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | TCWRT102 |
| Rated Impedance | 2 ohms |
| Type | Thin Profile |
| Woofer Size | Total 20 Inch |
| RMS | 400W |
| Peak Power | 800W |
| Sensitivity dB | 96.5 |
| Box Top Depth | 8.8 cm |
| Box Bottom Depth | 16.7 |
| Box Height | 39 cm |
| Box Width | 59.1 |
| In-Built Amplifier | No |
| Warranty | 1 Year |
10″ CompRT 2 Ohm Enclosure
The CompRT 10-inch Subwoofer Enclosure is the easiest way to get great bass under your seat, behind your back bench or in your cargo area. It comes loaded with a reFLEX™ passive subwoofer and CompRT active sub for extremely low bass, then carpeted and loaded with a single 2-Ohm terminal.
Built for extreme bass, this KICKER® sub box has extensive internal bracing and thick MDF construction. The CompRT's signature red double stitching makes an outstanding bond between the improved Santoprene surround and polypropylene woofer cone. Revolutionary SoloKon™ technology joins the cone to the vented back brace, creating a single integrated unit that both cools the motor and eliminates distortion.
To make our subs even more reliable, KICKER engineers developed Forced-Air Cooling™ to help our subs run 20 percent cooler than before.
The CompRT 10-inch Subwoofer Enclosure works best with 400 watts of recommended power. See below for more details.
View Complete Details
Yes, I am interested!
Interested in this product?
| Model Name/Number | DCWS102 |
| Brand | Kicker |
| Rated Impedance | 2 ohms |
| Subwoofer Size | 20 Inch |
| RMS | 600W |
| Peak Power | 1200W |
| Box Top Depth | 34.1 CM |
| Sensitivity dB | 98.4 |
| Box Bottom Depth | 41.6 cm |
| In-Built Amp | No |
| Box Height | 35.6 cm |
| Box Width | 71.1 cmc |
| Warranty | 1 Year |
Dual 10″ CompC 2 Ohm Enclosure
The CompC Dual 10-Inch Subwoofer Enclosure comes loaded with a single 2-Ohm terminal.
Features:
- Fits Perfectly In A Trunk or SUV
- Genuine CompC Subwoofer
- Custom Port Design
- Made Of Heavy MDF
- Spring Loaded Speaker Terminal
- Thick Black Carpet Protects the Enclosure
- Embroidered KICKER Logo
This enclosure works best with 600 watts of recommended power. See below for more details.
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | CWCD124 |
| Mounting Depth | 5.75 inches |
| 12-INCH SUBWOOFER | One Kicker CompR round 12 Inch Car Audio Subwoofer for serious bass power |
| 1000 WATTS MAX POWER | MAX Power Handling: 1000 Watts; RMS Power Handling: 500 Watts |
| DUAL VOICE COIL | Dual voice coils 2 Ohms impedance, 86.9 dB sensitivity and 28.6 HZ driver resonance frequency respon |
| Warranty: | 1 Year |
| In-Built Amplifier | No |
| POLYPROPYLENE CONE | Features polypropylene cone and ribbed santoprene surround for linear cone movement; Revolutionary |
| SPECIFICATIONS | Spiralead tinsel delivers your power reliably and efficiently |
Are you all about that bass when it comes to your subwoofers? That's radical, because this Kicker 12 Inch CompR Subwoofer is a master in the field. Play it loud and proud with rockin' bass in your ride. It boasts a 12 inch diameter, Spiralead tinsel for power and reliability, and ribbed Santoprene surrounds for clear, deep, and killer bass. Revolutionary SoloKon technology joins the cone to the vented back brace, creating a single integrated unit that both cools the motor and eliminates distortion. The 43CWR122 shows off 1000 watts of peak power, 500 watts of RMS power, and dual, 2 Ohm voice coil. It performs best with a sealed or ported enclosure and 500 watts of power. Bump the bass in your car with help from the Kicker 12 Inch CompR Subwoofer.
View Complete Details
Yes, I am interested!
Interested in this product?
| Continuous Power Handling (RMS) | 1000 W |
| In-Built Amp | No |
| Recommended Amplifier Power (RMS) | 400 - 1000 W |
| Warranty | 1 Year |
10th Anniversary Edition – W7 12-inch Subwoofer (1000 W, 3 Ω)
The 12W7AE brings serious performance to the table by combining the breakthrough of the long-excursion W7 design with a large 12-inch bore. It has been called "addictive," "seductive" and "the new subwoofer reference", by some of the world's toughest reviewers, and has earned these accolades by delivering nearly limitless dynamics, exceptional balance and world-class sound quality.
This potent driver is best used with amplifier power in the 400W – 1000W range and is optimized to operate in a 1.375 cu. ft. (38.9 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.
W7AE (Anniversary Edition) Subwoofers celebrate the 10th Anniversary of the launch of the W7 subwoofers. Functionally, they are identical to the original W7's, but are they distinguished by the following cosmetic differences:
- Satin-Black Powdercoated Baskets
- Bright Anodized Surround Clamp Ring
- Anniversary Edition Cone Badge
- Anniversary Edition Terminal Label
Dynamic Motor Analysis – DMA Optimized Motor
Summary:
JL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients… or put simply: tight, clean, articulate bass.
Detailed Information:
Since 1997, JL Audio has been at the forefront of Finite Element Analysis-based modeling of loudspeaker motors and suspensions. This research is aimed at decoding what we refer to as the "Loudspeaker Genome"… a project aimed at understanding the true behavior of loudspeakers under power and in motion. A major component of this integrated system is DMA (Dynamic Motor Analysis). Starting with the 15W3 and the W7 Subwoofers in the late 1990's and early 2000's, DMA has played an important role in the design of all JL Audio woofers sold today, including our component woofers.
View Complete Details
Yes, I am interested!
Interested in this product?
| Model Name/Number | CWCS104 |
| Brand | Kicker |
| Frequency Response | 30-500 Hz |
| subwoofer | 10" 4-ohm |
| Injection- | Molded polypropylene cone |
| Features 1 | ribbed foam surround |
| RMS | 250 watts |
| peak power handling | 500 watts |
| sensitivity | 86.2 dB |
When it comes to bass, Kicker wrote the book, as they were among the first to create subs and amps for cars. The Kicker CompC line has its roots in the original Kicker Comp subwoofer line that goes back to 1986, giving you the benefit of their decades of experience. The CompC Series 44CWCS104 10″ subwoofer features a flex-resistant polypropylene cone for hard-hitting lows without distortion, while the ribbed foam surround with its familiar yellow stitching promotes long excursion and helps to keep the cone on target.
Versatile installation
This sub handles up to 250 watts RMS to bring out the punch your music's been missing, and its 4-ohm impedance makes it compatible with just about every amplifier on the market. The sub's steel basket provides a reliable foundation for big bass, and its extensive venting ensures long-lasting performance that won't break down when the bass gets heavy. This versatile sub works well in sealed or ported enclosures.
Whats in the Box?
- One 10″ Subwoofer
- Owner's manual (English/ Spanish/ German/ French)
- 2 Kicker decals
- Template on box lid
View Complete Details
Yes, I am interested!
Interested in this product?
| Brand | Kicker |
| Model Name/Number | DSC6930 |
| Speaker Design | 3-Way |
| Woofer Size | 6x9 Inch |
| Woofer Cone Material | Polypropylene |
| Woofer Surround Material | Polyster Foam |
| Frequency Response [Hz] | 30-20K |
| Sensitivity [1W, 1m] | 92 |
| RMS | 90 |
DS Series 6×9″ 3-Way
The DS Triaxial (3-Way) Speakers are a great way to upgrade the sound in your car.
Using zero protrusion PEI tweeters ensures you get every bit of clarity you need, without interfering with factory grilles. A stamped steel framework supports a ribbed, UV-treated foam surround and rigid polypropylene cone with EVC™ (Extended Voice Coil) technology, for the best sonic quality. Add a DX amplifier to increase the level and quality of the volume in your ride.
These DS speakers work best with 90 watts of recommended power. See below for more details.
View Complete Details
Yes, I am interested!
Source: https://www.indiamart.com/silverline-distributor/car-woofer-subwoofers-and-basstubes.html
0 Response to "Rockford Fosgate 12 Dual Coil 1500 Continuous Rms"
إرسال تعليق